- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50
$17.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
$11.25 - $28.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
$16.00 - $25.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Sta Tru Front Wheel - Measures 9-inch across, uses a 12-inch tire - Single Wall Rim - Hub/Brake Compatibility: Rim Brake - ISO Diameter: 203 / 12.5-inch - Front Axle: 5/16-inch x 85mm - Rim Width (Internal): 24 mm - Tire Type: Clincher
Sta Tru Rear Wheel - 104mm spacing - Includes 18 tooth rear cog - Single Wall rim - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 12-inch - Cassette Body Type: 3 Prong Cog - ISO Diameter: 203 / 12.5-inch - Rim Width (Internal): 24 mm - Tire Type: Clincher - Rear Axle: 5/16-inch x 104mm
Shimano's 105 Front Hub is an excellent beginning to a strong, light front wheel. The diamond-polished bearing races mean the hub rolls super smooth and the labyrinth seals shut out dust, dirt and water. Plus, the cold-forged-aluminum hub shell is beautiful and built to last. You get Shimano's excellent quick-release skewer, too.
$38.99 - $72.99
Quick Release Model • Model Number: HB-M8000 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: QR • Axle Length: 100mm • Axle Diameter: 14mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 41mm • Center to Flange (Left): 44mm 15x100mm Thru-Axle Model • Model Number: HB-M8010 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: 15mm E-Thru • Axle Length: 100mm • Axle Diameter: 17.5mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 44mm • Center to Flange (Left): 44mm
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance
The Shimano HB-MT900-B front hub for Center Lock disc brakes provides faster acceleration by reducing inertia and weight.
- Replacement rear wheel skewer. - Specifically designed for use with Saris trainers. - Can be used for both indoor and outdoor rides.
$48.00 - $57.99
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
$54.00 - $65.99
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
A great price on rock-solid wheels. Using the made-in-America NoBS rim from Velocity, these 36-spoke units are ready for cargo, heavyweights, and maybe even potholes…
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
V2 Tubeless valves are stronger, lighter, and even easier to use thanks to the machined aircraft grade 7075 aluminum and Muc-Off's new Tire Insert air ?ow system. The new design features six slots that are machined into the base of the valve stem, allows tubeless sealant ?uid and air to ?ow freely, even when running tubeless tire inserts. - 7075 Machined Aluminum valve stem and cap - Tire Insert air flow system keep air moving freely and compatible with most tire foam inserts - 4mm machined Allen Key slot for easy installation and removal - Includes Valve Core Removal Tool (integrated into spare alloy cap) - Supplied with various rubber bases to optimize fit with multiple rim types
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
- Disc brake only - Sealed bearing hubs - 30mm Tubeless Ready rim - Does not include axles, tape, or tubeless components
$6.18 - $9.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
If wheel theft could be a problem, then these high-grade locking skewers and nuts will challenge even the most determined thieves. The KnoxNut features a one-of-a-kind nut protected by a super-tough free-floating outer ring, making it impossible to release your wheel with anything other than the special key. KnoxNuts can be installed on existing skewers or combined with the KnoxNut Skewer, a unique and unobtrusive blind-head cromoly skewer. The special forged key is lightweight and easy to carry. Use with regular 6mm allen key to unlock. All keys are marked with a unique serial number and replacement keys are only sold to consumers that have previously registered a key on deltacycle.com. Set Includes: - Front blind-head skewer with KnoxNut - Rear blind-head skewer with KnoxNut
$1.25 - $57.50
- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - 222g @ 32h/265mm - Box of 72 - Nipples sold separately
- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 222g @ 32h/265mm - Box of 100 - Nipples sold separately
$1.25 - $71.99
- Double butted 2.0/1.8/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 192g @ 32h/265mm - Box of 100 - Nipples sold separately
DT-Swiss Center Lock Adaptor. Allows 6-bolt rotors to be used on Center Lock hubs. - Rotor thickness between 1.8mm and 2.2mm - Easy assembly and only 29g - Made in Switzerland by DT Swiss - 230mm version accepts all rotors up to 203mm diameter - 160mm version accepts all rotors up to 160mm diameter
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Removable, plug-in lever design is streamlined and protects your RWS lever
A tubeless-ready disc brake road wheel that mates a carbon fairing and slippery aero profile to a classic aluminum rim. The feel of free speed What do you get when you combine state-of-the-art aerodynamics with the benefits of tubeless-ready? Say hello to Aeolus Comp 5 TLR Disc road wheel. This wheel features a classic aluminum rim and seamlessly attached 50mm carbon fairing for a proven aero profile that's been wind tunnel tested to be incredibly fast. Aeolus Comp 5 TLR Disc is the high-value option for the aero-conscious rider looking to ride fast and stop on a dime. - Rim construction combines lightweight aluminum rim with a bonded carbon fiber fairing - Tubeless Ready (TLR) rims allow for quick transition to a tubeless system - No rider weight restrictions
The feel of free speed What do you get when you combine state-of-the-art aerodynamics with the benefits of tubeless-ready? Say hello to Aeolus Comp 5 TLR Disc road wheel. This wheel features a classic aluminum rim and seamlessly attached 50mm carbon fairing for a proven aero profile that's been wind tunnel tested to be incredibly fast. Aeolus Comp 5 TLR Disc is the high-value option for the aero-conscious rider looking to ride fast and stop on a dime. - Rim construction combines lightweight aluminum rim with a bonded carbon fiber fairing - Tubeless Ready (TLR) rims allow for quick transition to a tubeless system - No rider weight restrictions
$13.99 - $16.99
Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips The valves you need to upgrade to Tubeless These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Use only with Bontrager TLR rim strip with rectangular base - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Sold as singles
$11.99 - $14.99
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40 - Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels
$14.99 - $17.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel
Page 1 of 5 Next page